How ceramic sand to improve exhaust manifold casting quality The exhaust manifold is an automobile accessory connecting the engine cylinder and the main exhaust pipe. The exhaust gas generated by the engine fuel in each cylinder enters the exhaust manifold through the diversion of the exhaust manifold. It can avoid the interference between the exhaust …
How ceramic sand to improve exhaust manifold casting quality Read More »
Ceramsite sand AFS50 AFS60 for Korea market Although affected by the electricity control policy and shipment delay, we finally successfully catch our customer’s schedule. Before delivery, we took strict quality inspections on chemical and particle size distributions. Thanks to all our staff for their hard work. All of the things we do is to provide …
Ceramic Sand vs Silica Sand The Ceramic sand (Also called Ceramsite sand) shell molding process mainly uses the coated sand with the Ceramic sand as the original sand. The shell molding process is a special casting process in which the sand shell is poured by the core shooting machine. Let’s find out what advantages Ceramic …
The ceremsite sand is made from calcined bauxite by smelting and blowing process. So it’s also called fused bauxite beads. The crushing resistance of Fused Bauxite Beads sand directly affects the strength and durability of foundry sand. The raw foundry sand is easily broken during the process of mixing, molding, pouring, falling sand cleaning, and …
The color of Foundry Ceramic Sand The main chemical composition of Foundry Ceramic Sand is Al2O3, and it also contains a small amount of iron oxide and silicon dioxide. Generally speaking, the color is bright, and the iron content of the Foundry Ceramic Sand is higher than 5%, but the color does not look …
Ceramic Sand has good flowability, high refractoriness. It can avoid many defects such as veins, sand burn-on, steel penetration which always caused by using quartz sand as Ceramic sand for RCS. Ceramic Sand Replace Quartz Sand is a very goods way for motor engine part foundry. But for most engine part foundry manufacturers, it’s not …
At room temperature, the core-making method in which the sand core is quickly hardened in the core box by blowing air is called the cold box core-making method. The hot box core making method is to inject the sand material mixed with foundry sand, thermosetting resin, and catalyst into a core box with a heating …
The AFS sizes of Ceramic Foundry Sand For Coldbox and Hotbox Core making Read More »
As a casting sand in the Cold-box Core Making process, Ceramic sand has many extraordinary advantages such as high refractoriness, easy to shake off, recycle used, etc. The use of Ceramic sand can avoid many defects in the casting process for a large range of different castings. In the meantime, it can save cost as …
The Ceramic sand (Also called Ceramsite sand) shell molding process mainly uses the coated sand with the Ceramic sand as the original sand and is a special casting process in which the sand shell is poured by the core shooting machine. Compared with the traditional shell molding process with silica sand resin-coated foundry sand, ceramic …
Comparison of Ceramic Sand Shell Molding Process and Silica Sand Shell Molding Process Read More »
The cold box casting refers to a resin sand forming process that is instantaneously formed at room temperature by means of gas or aerosol catalysis/hardening. The most common method of cold box casting is the triethylamine method, which uses phenolic-urethane resin and is hardened by blowing triethylamine gas. The characteristics of this process are: …
How Ceramic Sand Working As Core Making Sand In Cold Box Casting Read More »